Media Summary: This is a video that covers alot of modeling techniques. Construction geometry is used to create sketches that form slots. The slots ... Steps on how to bring the initial part into an assembly and fully constrain it with respect to the assembly coordinate system. Simple Extrusion with three features created with the extrude tool.
Pro E Tutorial 13 Tcnj - Detailed Analysis & Overview
This is a video that covers alot of modeling techniques. Construction geometry is used to create sketches that form slots. The slots ... Steps on how to bring the initial part into an assembly and fully constrain it with respect to the assembly coordinate system. Simple Extrusion with three features created with the extrude tool. A demonstration on how to use a helical sweep to create a representation of a screw thread. In this fifth step a 24 tooth gear is added to the axle that can rotate using the pin constraint. The gear is -fully- constrained with ... A demonstration on how to use the sweep tool to create a protusion.
In this step a third item is added to the assembly. The constraints are placed by accessing the placement tab. The part is fully ... In this step a second rotating axle is added and an 8-tooth gear is place on the new axel and positioned such that is meshes with ... A short video demonstrating how to utilize the sweep function. Creation of a part that requires the use of reference geometry. datum planes are created by both selecting two edges and by ...
